Recently, a customer has consulted us about the maintenance methods of oil leak bubbles in generating units. Please don't panic about the problem of oil leak bubbles in generating units. The following manufacturer of gas generating set gives us a detailed description of the solution.
Most generators have exhaust screw in their oil system. To remove the air bubbles in the oil circuit, just screw the exhaust screw. However, some generators do not release the screw when you can relax the tubing connector to eliminate bubbles. First, the air in the low pressure oil circuit is cleaned, and then the air is put into the high pressure oil circuit until there are no bubbles in the whole oil circuit. It is necessary to point out the reasons why air enters the oil circuit and thoroughly repair and clean the generator set.
The method of repairing steam bubbles in turbogenerator units is very simple, but this problem is not simply eliminated. We must find out the problem and eradicate it. If you want to know more about generator maintenance, please pay attention to our gas generator website