The power plant gives you a way to identify the authenticity. The diesel engine is the power output part of the diesel engine. The whole generator set accounts for 70% of the cost of the generator set. It is a fake link that some inferior manufacturers like to make. At present, almost all famous diesel engines on the market have imitation manufacturers, some manufacturers use the same appearance imitation machine as a famous brand, use false nameplates, play real numbers, print fake factory data and other cards, to achieve a large reduction in costs. It is difficult to distinguish a brand machine from a professional one. Every brand has retrofitted old machines, and unprofessional people may also find it difficult to distinguish. However, there are some defects in the retrofitted machine, such as paint, especially dead corner paint, which is difficult to reach the same level as the original manufacturer. Similar manufacturers are confusing, these manufacturers are hype, generators do not dare to do the brand, renovate, in the name of the manufacturer and the name of the diesel engine to do, in the name of similar manufacturers and diesel engines to confuse the public.
Gas Generator Set: How to identify the strength of the generator set manufacturer?
发电机的作用是将柴油机的动力转化为电能，这直接关系到输出功率的质量和稳定性。励磁方式发电机励磁方式可分为相复励式和无刷自激式。无刷自励磁以其励磁稳定、维护简单等优点成为主流，但对于300KW以下采用相位复合发电机的发电机组，仍有部分厂家存在成本问题。定子线圈用的定子线圈都是铜线，但随着电线制造技术的改进，出现了包铜铝芯的电线。与镀铜铝芯线不同，镀铜铝芯线是在镀铜铝芯线中形成的一种特殊模具，铜层比镀铜厚得多。包铜铝芯发电机定子线圈的性能差别不大，但使用寿命比全铜定子线圈短得多。控制系统普通标准机组需要手动切换，从断电到启动柴油发电机组的动力传输，一般需要10 ~ 30分钟。
The function of the generator is to convert the power of the diesel engine into electric energy, which is directly related to the quality and stability of the output power. The excitation mode of generator can be divided into two types: phase compound excitation and brushless self-excitation. Brushless self-excitation has become the mainstream because of its advantages of stable excitation and simple maintenance. However, there are still some cost problems for generators with phase composite generators below 300KW. Stator coils used in stator coils are all copper wires, but with the improvement of wire manufacturing technology, copper-clad aluminium cores have appeared. Unlike copper-plated aluminium core wire, copper-plated aluminium core wire is a special die formed in copper-plated aluminium core wire. The copper layer is much thicker than that of copper-plated aluminium core wire. The performance of stator coil of copper-clad aluminium core generator is not different, but its service life is much shorter than that of all-copper stator coil. Common standard units of control system need to be switched manually. It usually takes 10 to 30 minutes to start the power transmission of diesel generating units from power failure.
以上是瓦斯发电机组厂家为大家介绍的如何识别发电机组厂家的实力相关内容，本文来源： above is how to identify the strength of gas generator manufacturers. This article is from